Ford to Introduce Puma Mild Hybrid in 2022
- Ford Puma crossover enhances fuel efficiency, C02 performance and fun to drive character using advanced Ford EcoBoost Mild Hybrid (mHEV) 48-volt technology
- Ford Puma styling delivers the next chapter in Ford’s human centric design philosophy
The new Ford Puma compact crossover fuses stunning exterior design, uncompromised load space, and now coming in Q2 2022, sophisticated Mild Hybrid (mHEV) powertrain technology.
Ford New Zealand will be offering customers two mHEV variants; the Ford Puma EcoBoost mHEV and the Ford Puma EcoBoost ST-Line mHEV.
Ford’s EcoBoost Hybrid 48-volt technology delivers powerful, responsive performance and optimised fuel efficiency alongside lower C02 for Puma mHEV customers. The mHEV electrified powertrain seamlessly integrates electric torque assistance with a low-friction, three-cylinder 1.0-litre EcoBoost petrol engine to deliver up to 210 Nm.
“Our customers love their new Ford Pumas,” said Rachel White, Ford New Zealand Marketing Manager, Passenger and SUV. “We get fantastic feedback, particularly on its stylish design, clever interior and great driving characteristics. Adding the Mild Hybrid next year will increase its appeal even further and give those looking for an electrified solution a fantastic choice.”
Advanced powertrain technology
Ford New Zealand Puma customers will be among the first to benefit from Ford’s mHEV architecture – tailored to enhance fuel efficiency and C02 while complementing Ford’s fun to drive experience with more powerful and responsive performance.
EcoBoost Hybrid technology enhances Puma’s 1.0-litre EcoBoost petrol engine with an 11.5 kW belt-driven integrated starter/generator (BISG). Replacing the standard alternator, the BISG enables recovery and storage of energy usually lost during braking and coasting to charge a 48-volt lithium-ion air-cooled battery pack.
The BISG also acts as a motor, integrating with the engine and using the stored energy to provide torque assistance during normal driving and acceleration, as well as running the vehicle’s electrical ancillaries.
With 91kW of power, the intelligent, self-regulating mHEV system continuously monitors how the vehicle is being used to determine when and how intensively to charge the battery for optimal benefit, and when to utilise the stored battery charge using one of two strategies:
- Torque substitution, which deploys the electric motor functionality of the BISG to provide up to 50 Nm of torque – reducing the amount of work required from the petrol engine for a fuel efficiency improvement of up to 9 per cent. Torque substitution contributes to lower CO2 emissions from 112 g/km WLTP3* and fuel efficiency from 5.4 l/100 km.
- Torque supplementation, which deploys the electric motor functionality of the BISG to increase the total torque available from the powertrain by up to 20 Nm above the level available from the petrol engine alone at full load – and deliver up to 50 per cent more torque at lower rpm – for optimised performance
The BISG has also enabled Ford engineers to lower the 1.0-litre EcoBoost engine’s compression ratio and add a larger turbocharger for more power, by mitigating turbo-lag using torque supplementation that also rotates the engine faster for maintained turbocharger boost response.
Able to restart the engine in approximately 300 milliseconds – about the same as the blink of an eye – the BISG also enables the Puma EcoBoost Hybrid’s Auto Start-Stop technology to operate in a wider range of scenarios for even greater fuel savings, including when coasting to a stop below 15 km/h.
Drive mode technologies
Fun to drive characteristics are further enhanced with Ford’s selectable Drive Mode technology that enables drivers to adjust throttle response, ESC, traction control, plus gearshift timings for automatic models, to match responses and performance to the driving scenarios.
Drive Modes including Normal, Eco, Sport, Slippery and Trail enable customers to tailor their drive experience to road, weather and terrain conditions on demand, with each Drive Mode featuring a unique graphical display in the instrument cluster.
Puma further optimises Ford’s B-car architecture that also delivers class-leading driving dynamics for the Ford Fiesta. A new, stiffer twist-beam rear suspension, larger shock absorbers, stiffer suspension bushes and optimised suspension top mounts reduce friction and enhance stiffness throughout the chassis to support optimal driving dynamics.
The new Puma Mild Hybrid will be available in New Zealand from Q2 2022 with pricing to be announced closer to arrival.
* WLTP3 Figures are based on EU WLTP4 data and final NZ figures to be released closer to launch
28/11/2021Ford Charges Ahead In An Electric Era with Seven New Electrified Vehicles Coming…
27/09/2021Ford Puma crossover enhances fuel efficiency, C02 performance and fun to drive…
16/09/2021New, self-charging, full hybrid Escape Hybrid SUV seamlessly switches automatically…
15/02/2021Ford New Zealand is very pleased to be joint winners of Canstar’s “2020 Canstar…
6/10/202032-Inch BF Goodrich All-Terrain Tyres, Fox Shock Absorbers, 3500kg Towing and…
17/07/2020FordPass Connect Arrives in New Zealand, With Ford Ranger, Everest And Transit…
16/06/2020Ford New Zealand is excited to announce a special addition to the Ford Mustang…
3/05/2020We are excited to announce that Ford is the preferred Farmlands partner. Visit…
13/03/2020Award-Winning Ford Puma line up for New Zealand brings new levels of smart technology…
10/03/2020There’s a very high bar set for Ford Dealers, but some go above and beyond,…
8/01/2020FORD – Proud to be New Zealand's No.1 Selling Brand of Light Commercial…
8/01/2020FORD RANGER – Proudly New Zealand's No.1 Selling Vehicle – 2015,…